TEAMSUSTAIN SOLAR WATER HEATER
The sure alternative to conventional Electric Geysers

TeamSustain is in the forefront of Providing green and Sustainable Technologies world wide. TeamSustain is also a leading supplier of engineering services & equipment in the Renewable Energy field. We specialize in complete solutions including concept, design, project management, equipment supply, installation, commissioning & servicing of Renewable Energy projects. TeamSustain has introduced a range high quality Solar Water Heaters for the domestic sector. TeamSustain today is a one-stop-shop for sustainable technologies and services.

The TeamSustain Domestic Solar Water Heater can effectively replace two electric geysers

UNBELIEVABLE ADVANTAGE

See how fast it pays you back your investment

In short, the TeamSustain Domestic Solar Water Heater will ensure that you get hot water free for a lifetime after the first 2 years (Buy-back period).

OPERATING PRINCIPLES

The TeamSuatain Solar Water Heating System operates on the principle of "Effective Thermosyphon". The system consists of a storage tank, Solar Collector and internal piping. The water in the collector on exposure to sunlight becomes hot making the denser cold water in the system storage tank move down to the collector pushing the hot water up to the storage tank. This process continues through the entire day making the insulated storage tank full with hot water.

COMPONENTS AND SPECIFICATIONS TANK

Stainless Steel - Grade 304, 18swg, Insulation - 100mm Rockwool of 48Kg/M³ density with 22swg Aluminium cladding on top.

COLLECTOR

The heart of the Solar Water Heater is the Collector. It absorbs the energy from solar radiation and transfers heat to the water flowing in the copper risers and headers.

COLLECTOR BOX

Weather-tight construction. Dimensions of 2080mm x 1070mm x 100mm (nominal). Constructed of corrosion-resistant extruded Aluminium sections of 16 swg. Aluminium back sheet of 22swg.

SACRIFICIAL ANODE

Aluminium-Magnesium Alloy for corrosion protection.

ABSORBER

9 numbers of Copper tube risers -12.5mm OD 24swg wall thickness. Copper tube headers 25mm OD 22swg wall thickness. Copper fins 34swg NAlSUN selective coating for higher efficiency. Absorptivity - 0.97± 0.02 Emissivity -0.20 ± 0.02

GLAZING

Single pane, 4mm toughened and tempered glasses with rupture resistance.

THERMAL INSULATION

Mineral wool 50mm thick on the back and 25mm thick on the sides covered with Aluminium foil.

REFLECTIVE FOIL

Aluminium foil 24 microns thick.

ELECTRICAL BACK-UP

2KW with auto-control thermostat.

SUPPORTS FOR TANK AND COLLECTOR

Mild Steel, 2 coats Zinc Chromate Primer with 2 coats black enamel.

KEY FEATURES

• High efficient TeamSustain Collector (97% efficiency)
• Sacrificial anode for corrosion protection
• Negligible maintenance
• Environment friendly - Safe, clean and silent
• Enormous savings in electricity
• Ultrasonic welded - selective coated 99.9% Pure Copper-Copper Solar. Collectors for very long service life
• Environment friendly and hazard free
• Single roof mounted system serves multiple usage points
• No more unpleasant storage geysers and electrical accessories inside your beautiful bathroom
• Domestic heaters in capacities of 100, 200 & 300 LPD (Litres per day)
• Industrial heaters in capacities from 500LPD (Litres per day) to any capacity
• Available in a wide range of specifications
• Integrated supply tank support (accessory) for existing sites where supply tank (overhead) is on the terrace level
• All Stainless Steel Hardware
• Powder coated body
• 5 Years total system Warranty

Contact us by phone at: 1-888-233-9266 Ext 89 in the USA or +91-484-3298806/3298807/3295204 in Asia
Fill a form here for response via e-maill