| Solar > Solar Photo Voltaic > Invertors > Xantrex > |
|
|
|
XANTREX INVERTER |
|
| DR SERIES ACCESSORIES |
|
| |
Model |
Description |
DRI |
Stacking interface for two DR inverters, providing 120/240 VAC, 3 wire 240 VAC (doubles output) - includes two 1.5' battery cables and the stacking comm. cable (not for use with "E" or "W" models) |
DRCB |
Conduit box for all DR's - fits either end - AC/DC (1/2", 3/4" and 2" knockouts) adds 6" (15 cm) |
BTS/15 |
Battery Temperature Sensor for DR, SW, PS and UX Series inverters and charge controllers with 15' (5 m) cable (included standard on SW and PS Series) |
BTS/35 |
Battery Temperature Sensor with 35' (11 m) cable (included standard on all power panel systems) |
RC8/50 |
Remote on/off control with status LED indicator for all DR, PS, TS and UX Series - includes 50' (16 m) cable |
RC8/100 |
Remote on/off control with status LED indicator for all DR, PS, TS and UX Series - includes 100' (30.4 m) cable |
|
| |
| THREE PHASE SW POWER MODULE |
Three-phase, commercial scale systems can now enjoy the benefits of the world famous SW Series. From remote ranches to eco-tounst hotels this system delivers all of the features and performance of the SW at continuous power levels from 9 to 16.5 kW. Excellent for large, hybrid generator systems, each SW delivers reliable, independent power to each phase, allowing generator balancing, plus 24-hour power even when the gen-set is off. Generator run time can be reduced or eliminated by adding a renewable power source such as solar panels or wind generators. For stand-alone and back up applications.*
Floor Mount : 57" high (143 cm) x 34" wide (85 cm) x 19" deep (48 cm)
Unit weight : 527 or 560 lb (240 or 255 kg), depending on model |
|
| |
Model |
Description |
North American Applications |
PM-SW5548/3PH |
120 Y 208 VAC 60 Hz 16.5 kVA (5.5 kVA per phase) |
PM-SW4048/3PH |
120 Y 208 VAC 60Hz 12 kVA (4.0 kVA per phase) |
European Applications |
PM-SW4548E/3PH |
230 Y 400 VAC 50 Hz 13.5 kVA (4.5 kVA per phase) |
PM-SW3048E/3PH |
230 Y 400 VAC 50 Hz 10.0 kVA (3 3 kVA per phase) |
SW4548E3PH |
4.5 kVA 48 VDC 230 VAC 50 Hz (inverter only, provides single leg of three phase output) |
SW3048E3PH |
3.3 kVA 48 VDC 230 VAC 50 Hz (inverter only, provides single leg of three phase output) |
SWI/3PH |
Three-phase stacking interface cable |
3025 |
Three phase line monitor |
|
| * Although designed for easy installation, we recommend that power system
professionals install all three-phase systems. |
| |
|
|
